Vacancies

Current Vacancies

L&T-Chiyoda Limited (LTC), an engineering consultancy JV between two engineering giants Larsen & Toubro Limited, India and Chiyoda Corporation, Japan, offers the complete range of process plant engineering and design solutions to domestic & international clients in sectors critical to economic growth – Petroleum refining, Petrochemicals, Chemicals, Fertilizers, Oil & Gas and LNG. To achieve our ambitious growth plans, we are on a focused search for engineering talent, who can bridge the gap between concepts and practice, thus effectively handling implementation of cutting edge technologies for ensuring customer delight. Role attributes sought for includes continuous learning orientation, leadership qualities and strong domain knowledge in hydrocarbon plants. We are looking for top notch engineers with 4 – 20 years of experience in following disciplines.

Vadodara

MEP-HVAC Engineer - LTC-V/2017-2018-ENGG15412

Qualification : B.E./B.Tech. Mechanical

Technical Competencies-

  • Knowledge of HVAC Load Estimation (HAP software)
  • Knowledge on Duct or piping design.
  • Awareness about international codes like ASHARE, BS etc.
  • Basic knowledge of HVAC or refrigeration cycle system.
  • Exposure of working in HVAC system of refineries and petrochemical project
  • Site and commissioning exposure.

Role Description

  • Preparation of specification.
  • Preparation of MR, Scope matrix
  • Technical queries and BID evaluation on Vendor offers.
  • Vendor document review.
  • Interface with other discipline (FDs).
  • Issue of internal deliverable (electrical and civil load list etc.)

Experience : 2 to 4 years

LTC-V/2017-2018-IT23104

Qualification : Diploma or Graduate in IT/ Computer Engineering

Technical Competencies-

Managing

  • Windows Active Directory and Windows Client Operating Systems
  • Server installation
  • Data Centre
  • Network (LAN)
  • Imaging and Printing Services
  • Software Deployment
  • Communication Management
  • Up-to-date IT setup in meeting / conference rooms

Role Description

This is a Contractual Position and the candidate shall perform the following role:

Desktop Administration

  • Troubleshooting Windows Client Operating Systems
  • Guiding Helpdesk to resolve technical issues
  • Ensure enforcement of Desktop Compliances as per company’s policy
  • Manage and Maintain Remote Operating System Deployment (WDS)
  • Inventory Management
  • Support in activities for desktop replacement planning and execution
  • Evaluate and recommend hardware, firmware, drivers updates

Asset Management

  • Manage and maintain records of all IT assets
  • Responsible for up-to-date asset information
  • Manage hardware disposals

IT Help Desk

  • Guiding Helpdesk in resolving technical issues
  • Quality of service delivery
  • Recommend suitable modifications in Help Desk Portal in line with new services

Experience : 4 to 10 years

LTC-V/2017-2018-ENGG35929

Qualification : B.E./B.Tech./M.Tech.- Civil/Structural Engineering

Technical Competencies-

  • Should have sound fundamentals in Civil and structural engineering.
  • Exposure to design of foundations / structures and other civil works such as pits/ponds for refinery/petrochemicals or power plants is required.
  • Experience in Design of RC & Steel Structure for Oil/Gas/Refinery/Petrochemical projects. Exposure to American Codes for Civil/Structural is preferred.
  • Shall have hand-on experience in utilizing STAAD-Pro.
  • Exposure to other design software such as Foundation-3D, Mat-3D, GTStruDl, SAP2000, ETABS etc. will be desirable.
  • Shall have necessary skills and knowledge to check design calculations and drawings for Foundation and structures.
  • Working in integrated 3D environment including interface with other departments and vendors. Exposure to any one plant design system viz. PDS, PDMS or SP-3D is essential.

Role Description

This is a Contractual Position and the candidate shall perform the following role:

  • To study the Basic Engineering Design Document and other documents necessary to carry out further engineering activities
  • To perform and review/check engineering calculations, drawings and review Plant 3D models as required
  • To Design of RC & Steel Structure for Oil/Gas/Refinery/Petrochemical projects using STAAD, MS-Office & other Civil Engineering Software
  • To ensure that the departmental quality procedures are adopted consistently

Experience : 5 to 10 years

LTC-V/2017-2018-ENGG72946

LTC-PP- Engineer-Piping Material

Qualification : B.E./B.Tech. Mechanical

Technical Competencies-

  • Proficient in use of International / National codes and Standards related to piping Engineering.
  • Technical bid analysis.
  • Vendor offer / drawing review

Role Description

  • Shall function as Material Engineer for assigned projects.
  • Preparation, review and issuance of PMS, VMS, specification & standards.
  • Responsible for preparation, review and issue of documents related to piping materials – MTO for procurement, MR / PR, etc..
  • Preparation and review of datasheets for piping specialty items.

Experience : 4 to 6 years

LTC-V/2017-2018-ENGG14100

LTC-PP- 3D Modeler/Designer-Piping

Qualification : Diploma Mechanical

Technical Competencies-

  • Proficient in use of International / National codes and standard.
  • Modelling of piping and equipment in 3D environment (PDS / SP3D / PDMS).

Role Description

  • Shall function as Piping 3D Modeler/Designer for assigned projects.
  • Responsible for Preparation and review of equipment layouts / Piping GAD / isometrics / Nozzle orientation & piping load data drawings.
  • Carry-out piping routing studies and MTO.
  • Preparing drawings in 2D environment - Micro-station / AutoCAD.
  • Clash check comment incorporation.
  • Interface with other departments.
  • Review of vendor drawings, 3D model, isometrics and piping GADs.

Experience : 3 to 8 years

LTC-V/2017-2018-ENGG12005

LTC-PP- Engineer-Piping Layout

Qualification : B.E./B.Tech. Mechanical

Technical Competencies-

  • Preparation / review of equipment layouts / Piping GAD / isometrics, piping supports and specifications.
  • Modelling of piping and equipment in 3D environment (PDS / SP3D / PDMS).
  • Proficient in use of International / National codes and standards related to layout and piping engineering.
  • Knowledge of flexibility (Static & Dynamic) analysis of piping systems is desirable.

Role Description

  • Shall function as Area Lead Engineer for assigned projects.
  • Carry-out piping routing studies.
  • Material take-off.
  • Preparing drawings in 2D environment - Micro-station / AutoCAD.
  • Clash check and comment incorporation
  • Interface with other departments.
  • Review of vendor drawings, 3D model, isometrics and piping GADs.

Experience : 4 to 6 years

LTC-V/2017-2018-ENGG84533

LTC-PP- Area Engineer-Piping Layout

Qualification : B.E./B.Tech. Mechanical

Technical Competencies-

  • Preparation of equipment layouts / Piping GAD / isometrics / Nozzle orientation & piping load data drawings.
  • Modelling of piping and equipment in 3D environment (PDS / SP3D / PDMS).
  • Proficient in use of International / National codes and standard.

Role Description

  • Shall function as Area Engineer for assigned projects.
  • The candidate should be proficient in use of International / National codes and Standards related to layout and piping engineering.
  • Clash check and comment incorporation.
  • Participation in Milestone model review with client / PMC.
  • Interface with other departments.
  • Material take-off.
  • Vendor document review.

Experience : 7 to 10 years